Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
-
The network settings printout contains important information about your network. Handle it with care.
-
Check that printer is turned on.
-
Select
(Setup) on HOME screen.
Note- If User management settings is enabled, the user selection screen is displayed before the HOME screen is displayed.
-
Select Printer settings.
-
Select LAN settings.
-
Select Print details.
-
Check message and select Yes.
-
When the confirmation screen for printing passwords appears, select ON or OFF.
The printer starts printing the network setting information.
The following information on the printer's network setting is printed out. (Some setting values are not displayed depending on the printer settings.)
|
Item Number |
Item |
Description |
Setting |
|---|---|---|---|
|
1 |
Product Information |
Product information |
– |
|
1-1 |
Product Name |
Product name |
XXXXXXXX |
|
1-2 |
ROM Version |
ROM version |
XXXXXXXX |
|
1-3 |
Serial Number |
Serial number |
XXXXXXXX |
|
2 |
Network Diagnostics |
Network diagnostics |
– |
|
2-1 |
Diagnostic Result |
Diagnostic result |
XXXXXXXX |
|
2-2 |
Result Codes |
Result codes |
XXXXXXXX |
|
2-3 |
Result Code Details |
Result code details |
See Solve Network Troubles with The Printer's Diagnostic Functions to check details on the diagnostic result and result codes. |
|
3 |
Wireless LAN |
Wireless LAN |
Enable/Disable |
|
3-2 |
Infrastructure |
Infrastructure |
Enable/Disable |
|
3-2-1 |
Signal Strength |
Signal strength |
0 to 100 [%] |
|
3-2-2 |
Link Quality |
Link quality |
0 to 100 [%] |
|
3-2-3 |
Frequency |
Frequency |
2.4/5 [GHz] |
|
3-2-4 |
MAC Address |
MAC address |
XX:XX:XX:XX:XX:XX |
|
3-2-5 |
Connection |
Connection status |
Active/Inactive |
|
3-2-6 |
SSID |
SSID |
Wireless LAN network name (SSID) |
|
3-2-7 |
Channel |
Channel |
XXX (1 to 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165) |
|
3-2-8 |
Encryption |
Encryption method |
none/TKIP/AES |
|
3-2-10 |
Authentication |
Authentication method |
none/auto/open/shared/WPA-PSK/WPA2-PSK/WPA3-SAE/WPA-EAP/WPA2-EAP/WPA3-EAP |
|
3-2-11 |
TCP/IPv4 |
TCP/IPv4 |
Enable |
|
3-2-12 |
IP Address |
IP address |
XXX.XXX.XXX.XXX |
|
3-2-13 |
Subnet Mask |
Subnet mask |
XXX.XXX.XXX.XXX |
|
3-2-14 |
Default Gateway |
Default gateway |
XXX.XXX.XXX.XXX |
|
3-2-15 |
TCP/IPv6 |
TCP/IPv6 |
Enable/Disable |
|
3-2-16 |
Link Local Address |
Link local address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-17 |
Link Local Prefix Length |
Link local prefix length |
XXX |
|
3-2-18 |
Stateless Address1 |
Stateless address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-19 |
Stateless Prefix Length1 |
Stateless prefix length 1 |
XXX |
|
3-2-20 |
Stateless Address2 |
Stateless address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-21 |
Stateless Prefix Length2 |
Stateless prefix length 2 |
XXX |
|
3-2-22 |
Stateless Address3 |
Stateless address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-23 |
Stateless Prefix Length3 |
Stateless prefix length 3 |
XXX |
|
3-2-24 |
Stateless Address4 |
Stateless address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-25 |
Stateless Prefix Length4 |
Stateless prefix length 4 |
XXX |
|
3-2-26 |
Default Gateway1 |
Default gateway 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-27 |
Default Gateway2 |
Default gateway 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-28 |
Default Gateway3 |
Default gateway 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-29 |
Default Gateway4 |
Default gateway 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-2-33 |
IPsec |
IPsec setting |
Active/Inactive |
|
3-2-34 |
Security Protocol |
Security method |
ESP/ESP & AH/AH/Blank (Not selected) |
|
3-2-35 |
Wireless LAN DRX |
Discontinuous reception (wireless LAN) |
Enable/Disable |
|
3-3 |
Wireless Direct/Access Point Mode |
Operation mode for Wireless Direct |
Enable/Disable |
|
3-3-1 |
MAC Address |
MAC address |
XX:XX:XX:XX:XX:XX |
|
3-3-2 |
Connection |
Connection status |
Active/Inactive |
|
3-3-3 |
SSID |
SSID |
Wireless Direct network name (SSID) |
|
3-3-4 |
Password |
Password |
Wireless Direct password |
|
3-3-5 |
Channel |
Channel |
3,6,36,40 |
|
3-3-6 |
Encryption |
Encryption method |
AES |
|
3-3-7 |
Authentication |
Authentication method |
WPA2-PSK |
|
3-3-8 |
TCP/IPv4 |
TCP/IPv4 |
Enable |
|
3-3-9 |
IP Address |
IP address |
XXX.XXX.XXX.XXX |
|
3-3-10 |
Subnet Mask |
Subnet mask |
XXX.XXX.XXX.XXX |
|
3-3-11 |
Default Gateway |
Default gateway |
XXX.XXX.XXX.XXX |
|
3-3-12 |
TCP/IPv6 |
TCP/IPv6 |
Enable/Disable |
|
3-3-13 |
Link Local Address |
Link local address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
3-3-14 |
Link Local Prefix Length |
Link local prefix length |
XXX |
|
3-3-15 |
IPsec |
IPsec setting |
Active/Inactive |
|
3-3-16 |
Security Protocol |
Security method |
ESP/ESP & AH/AH/Blank (Not selected) |
|
3-3-17 |
Wireless LAN DRX |
Discontinuous reception (wireless direct) |
Disable |
|
3-3-18 |
Frequency |
Wireless Direct frequency |
2.4/5 [GHz] |
|
4 |
Wired LAN |
Wired LAN |
Enable/Disable |
|
4-1 |
MAC Address |
MAC address |
XX:XX:XX:XX:XX:XX |
|
4-2 |
Connection |
Wired LAN status |
Active/Inactive |
|
4-3 |
TCP/IPv4 |
TCP/IPv4 |
Enable |
|
4-4 |
IP Address |
IP address |
XXX.XXX.XXX.XXX |
|
4-5 |
Subnet Mask |
Subnet mask |
XXX.XXX.XXX.XXX |
|
4-6 |
Default Gateway |
Default gateway |
XXX.XXX.XXX.XXX |
|
4-7 |
TCP/IPv6 |
TCP/IPv6 |
Enable/Disable |
|
4-8 |
Link Local Address |
Link local address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-9 |
Link Local Prefix Length |
Link local prefix length |
XXX |
|
4-10 |
Stateless Address1 |
Stateless address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-11 |
Stateless Prefix Length1 |
Stateless prefix length 1 |
XXX |
|
4-12 |
Stateless Address2 |
Stateless address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-13 |
Stateless Prefix Length2 |
Stateless prefix length 2 |
XXX |
|
4-14 |
Stateless Address3 |
Stateless address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-15 |
Stateless Prefix Length3 |
Stateless prefix length 3 |
XXX |
|
4-16 |
Stateless Address4 |
Stateless address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-17 |
Stateless Prefix Length4 |
Stateless prefix length 4 |
XXX |
|
4-18 |
Default Gateway1 |
Default gateway 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-19 |
Default Gateway2 |
Default gateway 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-20 |
Default Gateway3 |
Default gateway 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-21 |
Default Gateway4 |
Default gateway 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
|
4-25 |
IPsec |
IPsec setting |
Active/Inactive |
|
4-26 |
Security Protocol |
Security method |
ESP/ESP & AH/AH/Blank (Not selected) |
|
4-27 |
Wired LAN DRX |
Discontinuous reception (wired LAN) |
Enable/Disable |
|
5 |
Other Settings |
Other settings |
– |
|
5-1 |
Printer Name |
Printer name |
Printer name |
|
5-2 |
Wireless Direct DevName |
Device name for wireless direct |
Device name for wireless direct |
|
5-4 |
WSD Printing |
WSD printing setting |
Enable/Disable |
|
5-5 |
WSD Timeout |
Timeout |
1/5/10/15/20 [min] |
|
5-6 |
LPD Printing |
LPD printing setting |
Enable/Disable |
|
5-7 |
RAW Printing |
RAW printing setting |
Enable/Disable |
|
5-9 |
Bonjour |
Bonjour setting |
Enable/Disable |
|
5-10 |
Bonjour Service Name |
Bonjour service name |
Bonjour service name |
|
5-11 |
LLMNR |
LLMNR setting |
Enable/Disable |
|
5-12 |
SNMP |
SNMP setting |
Enable/Disable |
|
5-14 |
DNS Server |
Obtain DNS server address automatically |
Auto/Manual |
|
5-15 |
Primary Server |
Primary server address |
XXX.XXX.XXX.XXX |
|
5-16 |
Secondary Server |
Secondary server address |
XXX.XXX.XXX.XXX |
|
5-17 |
Proxy Server |
Proxy server setting |
Enable/Disable |
|
5-18 |
Proxy Address |
Proxy address |
XXXXXXXXXXXXXXXXXXXX |
|
5-19 |
Proxy Port |
Proxy port specification |
1 to 65535 |
|
5-20 |
Cert. Fingerprt(SHA-1) |
Certificate fingerprint(SHA-1) |
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx |
|
5-21 |
Cert. Fingerprt(SHA-256) |
Certificate fingerprint(SHA-256) |
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx |
|
7 |
Web Services |
Web Services |
– |
|
7-1 |
Unsent Usage Logs |
Number of unsent usage logs |
0 to 200 |
|
7-2 |
Usage Log Last Sent |
Last date when usage log was sent |
XXXXXXXX |
|
7-3 |
Web Service Status |
Registration status |
Not set/Disabled/Registration pending/Registered |
|
7-4 |
Log Transmission Status |
Transmission result |
Not activated/Processing/Server error/Connection error/Timeout error/Error/Awaiting server response/Active |
|
9 |
Security policy |
Security policy status |
– |
|
9-1 |
Security administrator password |
Security administrator password |
Enable/Disable |
|
9-2 |
Interface |
Interface function |
– |
|
9-2-1 |
Wi-Fi policy |
Wireless connection policy |
– |
|
|
Prohibit use of direct connection |
Prohibit use of direct connection |
Enable/Disable |
|
|
Prohibit use of wireless LAN (Wi-Fi) |
Prohibit use of wireless LAN |
Enable/Disable |
|
9-2-2 |
USB policy |
USB connection policy |
– |
|
|
Prohibit use of USB connection |
Prohibit use of USB device |
Enable/Disable |
|
|
Prohibit use of external USB devices |
Prohibit use as USB storage device |
Enable/Disable |
|
9-3 |
Network |
Network function |
– |
|
9-3-1 |
Communication policy |
Communication operational policy |
– |
|
|
Always verify signatures for SMB/WebDAV server functions |
Always verify signatures when using SMB/WebDAV server functions |
Enable/Disable |
|
|
Always verify server certificate when using TLS |
Always verify server certificate when using TLS |
Enable/Disable |
|
|
Prohibit cleartext authentication for server functions |
Prohibit cleartext authentication for server functions |
Enable/Disable |
|
|
Prohibit use of SNMPv1 |
Prohibit use of SNMPv1 |
Enable/Disable |
|
9-3-2 |
Port usage policy |
Port Usage Policy |
– |
|
|
Restrict LPD port |
Restrict LPD port |
Enable/Disable |
|
|
Restrict RAW port |
Restrict RAW port |
Enable/Disable |
|
|
Restrict FTP port |
Restrict FTP port |
Enable/Disable |
|
|
Restrict WSD port |
Restrict WSD port |
Enable/Disable |
|
|
Restrict BMLinkS port |
Restrict BMLinkS port |
Enable/Disable |
|
|
Restrict IPP port |
Restrict IPP port |
Enable/Disable |
|
|
Restrict SMB port |
Restrict SMB port |
Enable/Disable |
|
|
Restrict SMTP port |
Restrict SMTP port |
Enable/Disable |
|
|
Restrict dedicated port |
Restrict dedicated port |
Enable/Disable |
|
|
Restrict remote operation's software port |
Restrict remote operation's software port |
Enable/Disable |
|
|
Restrict SIP (IP Fax) port |
Restrict SIP (IP Fax) port |
Enable/Disable |
|
|
Restrict mDNS port |
Restrict mDNS port |
Enable/Disable |
|
|
Restrict SLP port |
Restrict SLP port |
Enable/Disable |
|
|
Restrict SNMP port |
Restrict SNMP port |
Enable/Disable |
|
9-4 |
Authentication |
Authentication function |
– |
|
9-4-1 |
Authentication policy |
Authentication operational policy |
– |
|
|
Prohibit guest users from using the printer |
Prohibit guest users from using the device |
Enable/Disable |
|
|
Force auto logout |
Force auto logout |
Enable/Disable |
|
|
Logout period |
Time Until Logout |
xx sec |
|
9-4-2 |
Pwd operation policy |
Password operational policy |
– |
|
|
Prohibit caching of password for external servers |
Prohibit caching of password for external servers |
Enable/Disable |
|
|
Display warning when default password is in use |
Display warning when default password is in use |
Enable/Disable |
|
|
Prohibit use of default password for remote access |
Prohibit use of default password for remote access |
Enable/Disable |
|
9-4-3 |
Password settings policy |
Password settings policy |
– |
|
|
Minimum number of characters for password |
Set minimum number of characters for password |
Enable/Disable |
|
|
characters (1 - 32) |
Set minimum number of characters |
1~32 (characters) |
|
|
Password validity period |
Set password validity period |
Enable/Disable |
|
|
days (1 - 180) |
Validity period for password |
1-180 days |
|
|
Prohibit use of 3 or more identical consecutive characters |
Prohibit use of 3 or more identical consecutive characters |
Enable/Disable |
|
|
Require use of at least 1 uppercase character |
Force use of at least 1 uppercase character |
Enable/Disable |
|
|
Require use of at least 1 lowercase character |
Force use of at least 1 lowercase character |
Enable/Disable |
|
|
Require use of at least 1 number |
Force use of at least 1 digit |
Enable/Disable |
|
|
Require use of at least 1 symbol |
Force use of at least 1 symbol |
Enable/Disable |
|
9-4-4 |
Lockout policy |
Lockout Policy |
– |
|
|
Enable lockout |
Enable lockout |
Enable/Disable |
|
|
Lockout threshold (times) |
Lockout Threshold |
1-10 time |
|
|
Lockout period (minutes) |
Lockout Period |
1-60 min |
|
9-5 |
Key/Certificate |
Key/Certificate function |
– |
|
|
Prohibit use of weak encryption |
Prohibit use of weak encryption |
Enable/Disable |
|
|
Prohibit use of key/certificates with weak encryption |
Prohibit use of key/certificate with weak encryption |
Enable/Disable |
|
|
Use TPM to store password and key |
Use TPM to store password and key |
Enable/Disable |
|
9-6 |
Log |
Log function |
– |
|
|
Force recording of audit log |
Force recording of audit log |
Enable/Disable |
|
|
Require SNTP settings |
Force SNTP settings |
Enable/Disable |
|
|
Server name |
SNTP server name setting |
URL |
|
9-7 |
Job |
Job function |
– |
|
9-7-1 |
Printing policy |
Printing Policy |
– |
|
|
Prohibit immediate printing of received jobs |
Prohibit immediate printing of received jobs |
Enable/Disable |
|
9-7-2 |
Send/Receive policy |
Sending/Receiving Policy |
– |
|
|
Allow sending only to registered addresses |
Allow sending only to registered addresses |
Enable/Disable |
|
|
Force confirmation of fax number |
Force confirmation of fax number |
Enable/Disable |
|
|
Prohibit auto forwarding |
Prohibit auto forwarding |
Enable/Disable |
|
9-7-3 |
Storage |
Storage policy |
– |
|
|
Force complete deletion of data |
Force complete deletion of data |
Enable/Disable |
("XX" represents alphanumeric characters.)
